Conductivity:1.5W/M.K
Resistance:≤0.2℃-in²/W
Working Temperature:-40-200℃
Certification:ROHS,REACH
Packing Suggestion:150ML,600ML,2600ML
Conductivity:1.5W/M.K
Resistance:≤0.2℃-in²/W
Working Temperature:-40-200℃
Certification:ROHS,REACH
Packing Suggestion:150ML,600ML,2600ML
DUOBO 1.5W/M.K Silicone Thermal Grease is meticulously crafted to provide an exceptional balance of thermal management and ease of application, addressing the critical need for efficient heat dissipation in today's demanding electronic systems. Engineered with precision, this grease effectively bridges the gap between high-performance components and their cooling solutions, ensuring optimal operating temperatures and prolonging the lifespan of your valuable hardware. By alleviating thermal bottlenecks, it empowers users with enhanced system stability, faster operation, and reduced risk of overheating-related failures, thereby delivering unparalleled value and peace of mind.
Optimized Thermal Conductivity: At 1.5 watts per meter-kelvin (W/m.K), our silicone-based compound ensures efficient heat transfer from hotspots like CPUs and GPUs to heat sinks, maintaining peak performance under load.
Non-Corrosive & Electrically Insulating: Formulated to be safe for all electronic components, it prevents electrical shorts while being non-reactive with metals and plastics.
Wide Temperature Range: Withstands extreme temperatures (-40°C to 200°C) without altering its properties, assuring year-round reliability.
Long-Term Stability: Resists drying, cracking, and pump-out, maintaining its effectiveness over extended periods without reapplication.
Surface Preparation: Clean both the component surface and heat sink thoroughly with isopropyl alcohol and a microfiber cloth to remove any residue or old thermal paste.
Pea-Sized Dab: Apply a pea-sized amount of the grease to the center of the CPU or GPU's Integrated Heat Spreader (IHS).
Spread Evenly: Using a plastic card or the provided spreader, gently spread the grease to cover the entire surface without gaps, ensuring a thin, uniform layer.
Testing Item | Unit | Testing Method | Testing Value |
Colour | - | Visual | White or customized |
Thermal Resistance | ℃-in2/W | ASTM D1470 | ≤0.2 |
Component Ratio | - | ASTMD1475 | >2.0 |
Evaporation | % | Fed.Std.791 | <0.001 |
Oil Precipitation | % | Fed.Std.791 | <0.05 |
Dielectric Constant | - | ASTM D150 | >5 |
Viscosity | ( mPa.s@25℃) | DHR-2 | (100~300)*104 |
Cone Penetration | 1/10 MM | GB/T-269 | 410±10 |
Working Temperature | ℃ | - | -40~200℃ |
Flaming Rating | - | UL 94 | V0 |
Weight loss | % | @200°200H |
<1 |
density | g/cc | ASTM D792 |
2.3(±0.3) |
Thermal Conductivity | W/M.K | ASTM D5470 | 1.5 |